SL-9 Complete Build Kit

An all in one kit to complete your SL-9 build! This kit contains everything found in the SL-9 Combo kit, plus a complete upper chambered in 9 x 19. This kit contains everything you need to complete your SL-9. All you need to do is print the lower!

The uppers are assembled to provide a logical choice for the SL-9 lower. The following parts are used:

• 11″ 9 mm barrel with 1/2 x 28 threads from Ballistic Advantage. This is the same length as a 10.5″ AR-15 barrel.
• 16 Ounce 9 mm bolt from KAK. Glock mag compatible.
• Type 42 flash suppressor from KAK.
• 9″ M-LOK handguard from KAK.
• Extended Warhammer charging handle from Breek.
• AR-9 upper receiver with standard dust cover. No Forward assist. These uppers are designed specifically for AR-9’s and do not have cam pin or gas tube cuts.

These uppers are assembled and tested in house. Due to the live fire testing the uppers may have some slight signs of wear or fouling.

The complete upper weighs 3.5 Pounds.

Lower Parts:

• Carbine Buffer Tube, Spring, and Extended Eight Ounce Mass.
• Buffer Retainer Detent and Spring.
• Safety Selector with Detent and Spring.
• Trigger with Spring.
• Hammer with Spring.
• Disconnector with Spring.
• Bolt Hold Open Lever with Dowel Pin, Spring, and Plunger.
• Magazine Catch Spring.
• Front and Rear Take Down Pins with Springs and Detents.

Reinforcement Parts:

• Four Bushings.
• Bushing Installation Tool
• Two Aluminum Front Plates.
• Cheek Plates.
• Two 10-32 Nuts.
• Two 10-32 x 1.25″ Screws
• 3/32″ x 7/8″ Dowel Pin.
• Magazine Catch.
• Ejector.
• Last Round Bolt Hold Open Levers.
• Custom Black Oxide Steel Last Round Bolt Hold Open Shaft (replaces Aluminum Hex Rod shown in picture).
• Hose Clamp.
• Hose Clamp Cover.
• Two 10-32 x 3/16″ Set Screws.

A small spare parts bag is added to each Combo Kit. This includes:

• Take Down Pin Detent and Spring.
• Safety Selector Detent and Spring.
• Bolt Hold Open Pin And Plunger.
• Buffer Retainer.

And that is everything in the kit! For more info, check out the SL-9 download on the Designs Page.